Hot Melt Glue

We can supply various adhesive for making diapers, sanitary napkin and other hygiene products etc.

Type of adhesive            Pressure sensitive hotmelt based on synthetic rubbers.

 Field of application          Nonwoven hygiene products

Pressure sensitive hotmelt for sanitary napkins and panty shields with nonwoven - or PE back sheet

Product specifications

Viscosity                   180 °C 400 - 900 mPa.s acc. to Brookfield RVT DV II, Spindle 27, 100 rpm

Softening point             70 - 80°C acc. to Ring & Ball (ASTM E 28)

Product characteristics

Colour                      slightly yellow; transparent film

Specific gravity       about 1 g/cm3

Remarks                  It has a high tack allowing a low application weight with sufficient adhesion properties. It is applied on common nonwovens and PE-films. The cohesion, ageing - and temperature

stability is very good.

 

Further viscosities (mean values):

140 °C 2.520 mPa.s

150 °C 1.740 mPa.s

160 °C 1.250 mPa.s

170 °C 930 mPa.s

180 °C 730 mPa.s

 

Application                 

It is mainly applied by slot nozzle.

Working temperature        155 - 175 °C

Disposal                    According to DIN-safety data sheet

Safety measures             According to DIN-safety data sheet

Storage                     If stored at room temperature and in original cartons, shelf life is 1

FDA-Status                 acc. to CFR, title 21, § 175.105 adhesives

Marking Gef.StoffV (VgA):    no marking

Hot Melt Glue